Moku:Lab

Oscilloscope, Spectrum Analyser, Waveform Generator, Data Logger, & Arbitrary Waveform Generator

Description

La plate-forme de test et de mesure la plus flexible au monde. Combinant la puissance de traitement du signal d’un FPGA avec du matériel analogique haute vitesse pour offrir d’excellentes performances pour 12 instruments

Points Clés

Moku:Lab is a reconfigurable hardware platform that combines the digital signal processing power of an FPGA with versatile analog inputs and outputs. This simplifies your workflow by giving you access to 12 high-performance instruments that enable you to measure what you need when you need.

Vidéos

Spécifications

Le Moku Lab dans sa version de base permets d’avoir accès à 5 instruments en 1 seul équipement
  • Oscilloscope
  • Data Logger
  • Spectrum Analyser
  • Arbitrary Waveform Generator
  • Waveform Generator
Avec la possibilité de l’upgrader vers :
  • FIR Filter Builder
  • PID Controller
  • Laser Lock Box
  • Lock-in Amplifier
  • Frequency Response Analyser
  • Phasameter
  • Digital Filter Box
  • And more to come!

Analog inputs

  • Channels2
  • Bandwidth (-3 dB)200 MHz into 50 Ω
  • Sampling rate500 MS/s per channel
  • Resolution 12-bit
  • Maximum voltage range 10 Vpp into 50 Ω with 20 dB attenuation
  • Input impedance 50 Ω / 1 MΩ
  • Input coupling AC / DC
  • AC coupling corner (-3 dB) 100 Hz into 50 Ω / 30 Hz into 1 M Ω
  • SNR 60 dBFS (per sample)
  • Input referred noise 30 nV/√Hz above 100 kHz
  • ConnectorBNC

Analog outputs

  • Channels 2
  • Bandwidth (-3 dB) >300 MHz
  • Sampling rate 1 GSa/s per channel
  • Resolution 16-bit
  • Voltage range 2 Vpp into 50 Ω
  • Output impedance 50 Ω
  • Output coupling DC
  • ConnectorBNC

External trigger

  • Trigger waveform TTL compatible
  • Trigger bandwidth DC to 5 MHz
  • Trigger impedanceHi-Z
  • Min trigger level1.8 V
  • Max trigger level5 V
  • ConnectorBNC

On-board clock

  • Frequency 10 MHz
  • Stability < 500 ppb

10 MHz reference input

  • Expected waveforms Sine / square
  • Frequency 10 MHz ± 250 kHz
  • Input range -10 dBm to +10 dBm
  • Connector BNC

10 MHz reference output

  • Waveform type Square
  • Output frequency 10 MHz
  • Output level -3 dBm
  • Connector BNC

Fully Connected

Wi-Fi: Moku:Lab was designed with modern networking technologies in mind. High-speed Wi-Fi lets you interact with your experiment as you move around the lab. No Wi-Fi in your lab? The Moku:Lab can host its own Wi-Fi network for the iPad to connect to. Ethernet: For labs where Wi-Fi is not allowed, Moku:Lab has Ethernet and even an airplane mode that turns off its radio hardware. SD storage: Moku:Lab comes with an 8 GB SD card and with the included Moku:DataLogger instrument you can perform unsupervised, reliable data logging. Set up an overnight measurement run and the data will be retrieved once you reconnect. Software Integrations Le MokuLab peut etre piloté via une Application Ipad, Windows App, ou intégré sous Python, MATLAB ou LabVIEW